◆Used for soft finishing of cotton and other fabrics. 
◆Excellent hand, soft and hydrophilic. 
◆Good stability and good compatibility.

Padding: 4.0-15.0g/L

◆Used for soft treatment of cotton and other fabrics. 
◆Excellent hand feel, excellent softness and smoothness. 
◆For highly concentrated products, it can be used in 1:5-6.

Padding: 4.0-15.0g/L

◆It is used for soft finishing of cotton, T/C, T/R and other blended fabrics. It is soft, fluffy, quite elastic and smooth.

Padding: 20-60g/L

◆ Have a good feel and fluffiness. Fluffy finish for pure cotton or polyester yarn.

10.0-50.0g/L

◆Applicable to cotton/nylon dyeing or printing to prevent staining of nylon by reactive dyes. 
◆Excellent anti-reactive dye has no effect on the dyeing depth, color and dyeing fastness of nylon.

1.0-4.0g/L

◆It can slowly reduce the pH value of dyeing bath during dyeing and heating process, and promote the acidity of dyeing liquid to be gradually strengthened. It is suitable for leveling, especially for light or bright colors. 
◆It helps to match the dyes in the dyeing process, ensures the uniformity of dyeing, does not affect the color shade, and ensures the reproducibility of dyeing under various dyeing conditions. 
◆Avoid the problem of supplemental acid caused by HAC volatilization during dyeing, simplify the dyeing process and reduce the dyeing time of nylon and wool.

0.5-1.5g/L

◆Applicable to the one-bath method of chemical fiber yarn and fabric. 
◆It has good emulsifying properties and can effectively prevent re-contamination. 
◆It has good dispersibility and can effectively prevent the accumulation of oligomers. 
◆Can be used to enhance the penetration and wetting of the dyed carpet yarn.

1.0-2.0g/L

◆Applicable to the dyeing process of polyester, polyester/cotton disperse dyes to improve the reproducibility of dyeing. 
◆The filler used in some fibers or dyes will decompose products with weak reducing properties under high temperature conditions. Especially the blue and black series of disperse dyes are very sensitive to reducing agents, so adding this product in the dyebath can eliminate The effect of weak reducing products on dyeing increases the color yield of the dye. 
◆ It can prevent the dye from being reduced during the dyeing process of disperse dyes, thus eliminating the effect on color light.

1.0-3.0g/L

◆ Applicable to the dyeing of polyester/polyester/cotton one-bath dyeing. 
◆ Buffer with chelated metal ions to protect dyes sensitive to metal ions, but has no effect on metal ion-containing activity or direct dye color. 
◆ Substitute glacial acetic acid, the irritating odor is lower than glacial acetic acid, less volatile, easy to store. 
◆ It can effectively control the PH buffering force, and can avoid allergic to PH when cotton is dyed when polyester/cotton dyeing. 
◆ It can maintain the dyeing liquid pH at 4.0-4.5 during the long-term dyeing process without additional acid.

0.5-1.5g/L

◆It is used to increase the bath ratio, and it is necessary to improve the anti-migration property and fabric streak coverage during dyeing. 
◆ It can also be used in the wet phase padding process to improve the overall wet fastness.

Cold rolled padding: 5.0-15.0g/L 
continuous bleaching: 5.0-10.0g/L

◆Can replace the traditional fixing base of reactive dyes - soda ash. The dosage is small, and the amount of soda ash is 1/8-1/10, which reduces the labor intensity. 
◆Reduce 1-2 times of water washing, reduce sewage discharge and shorten dyeing time. 
◆Applicable to dyeing of reactive dyes such as cotton knit and cotton yarn.

1.0-3.0g/L

◆Excellent defoaming and antifoaming properties. 
◆Excellent heat resistance and shear stability. 
◆ Suitable for high temperature dyeing.

0.2-1.0g/L